BPHXF - K 408 DRY FILM LUBRICANT
- MSDS: BPHXF
- Manufacturer: STONER INC
- Product Name: K 408 DRY FILM LUBRICANT
- National Stock Number: 9150-00D002906
Product Identification
Product ID:K 408 DRY FILM LUBRICANT
MSDS Date:04/01/1992
FSC:9150
NIIN:00D002906
MSDS Number: BPHXF
Responsible Party
QUARRYVILLE, PA 17566-9407
US
Emergency Phone: 717-786-7355/800-424-9300(CHEMTREC)
Info Phone: 717-786-7355
Cage: 5Y425
Contractor
Telephone: 800-227-5538
Cage: 5Y425
Ingredients
HALOGENATED HYDROCARBONS
OSHA PEL 1000 PPM (MFR)
ACGIH TLV: 1000 PPM (MFR)
FLUOROTELOMER MIXTURE
CAS: 22-57-5
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- INHALATION OF HIGH
CONCENTRATIONS OF VAPORS IS HARMFUL & NAY CAUSE DIZZINESS,
HEADACHE, INCOORDINATION & LOSS OF CONSCIOUSNESS. GROSS
OVEREXPOSURE MAY BE FATAL. SKIN CONTACT WITH LIQUID MAY CAU SE
FREEZING. EYE CONTACT WITH VAPOR MAYCAUSE IRRITATION WITH
TEARING/BLURRED VISION. CHRONIC- NONE KNOWN.
Effects of Overexposure:INHALATION OF HIGH CONCENTRATIONS OF VAPORS IS
HARMFUL & NAY CAUSE DIZZINESS, HEADACHE, INCOORDINATION & LOSS OF
CONSCIOUSNESS. GROSS OVEREXPOSURE MAY BE FATAL. SKIN CONTACT WITH
LIQUID MAY CAUSE FREE ZING. EYE CONTACT WITH VAPOR MAY CAUSE
IRRITATION WITH TEARING/BLURRED VISION.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS OR EYE PROBLEMS OR IMPAIRED CARDIOVASCULAR OR RESPIRATORY
FUNCTION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THE SUBSTANCE.
First Aid
First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. SKIN:FLUSH WITH
WATER. TREAT FOR FROSTBITE IF NEEDED. INHALATION: REMOVE TO FRESH
AIR. PROVIDE CPR/OXYGEN IF NECESSARY. EYE: IMMEDIATELY FLUSH WITH
WATER FOR 15 MINUTES WHILE HOLDING EYELIDS OPEN.INGESTION: CALL A
PHYSICIAN. NOTE TO PHYSICIAN:BECAUSE OF POSSIBLE DISTURBANCE OF
CARDIAC RHYTHM, CATECHOLAMINE DRUGS SHOULD BE USED WITH SPECIAL
CAUTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:AEROSOL,NON-FLAM
Lower Limits:2.0 ISOPROPY
Upper Limits:12 ISOPROPYL
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL. WATER SPRAY
MAY BE USED TO KEEP FIRE EXPOSED CONTAINERS COOL & FLUSH SPILLS
AWAY.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST IF HEATED. VAPORS
CONFINED IN A POORLY VENTILATED AREA MAY BE IGNITED BY A SPARK OR
FLAME. DECOMPOSITION MAY OCCUR.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENTS IF NEEDED.
VENTILATE AREA. REMOVE ALL SOURCES OF IGNITION. AVOID VAPORS.
EVACUATE AREA UNTIL GAS HAS DISPERSED.
Handling
Handling and Storage Precautions:STORAGE- STORE IN A COOL, DRY AREA,
AWAY FROM HEAT, OPEN FLAMES & OXIDIZING AGENTS. CONTENTS UNDER
PRESSURE. DO NOT HEAT ABOVE 52C (125F).
Other Precautions:AVOID REPEATED OR PROLONGED CONTACT WITH SKIN. DO NOT
GET IN EYES. DO NOT BREATHE VAPORS OR MISTS. WASH THOROUGHLY AFTER
HANDLING. CONTENTS UNDER PRESSURE. KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NON REQUIRED UNDER NORMAL CONDITIONS. IF HIGH
VAPOR OR MIST CONCENTRATIONS EXPECTED, USE NIOSH-APPROVED
RESPIRATOR FOR ORGANIC VAPORS AND MISTS. WEAR SUPPLIED-AIR
RESPIRATOR PROTECTION OR SCBA IN CONF INED OR ENCLOSED SPACES, IF
NEEDED.
Ventilation:LOCAL EXHAUST WHEN LARGE AMOUNT IS RELEASED. MECHANICAL
VENTILATION SHOULD BE USED IN LOW PLACES.
Protective Gloves:LINED RUBBER IF CONTACT POSSIBLE
Eye Protection:USE CHEMICAL SAFETY GOGGLES & FACESHIELD
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:DO NOT TAKE INTERNALLY. WASH BEFORE EATING,
DRINKING OR SMOKING.
Supplemental Safety and Health
THIS AEROSOL IS NON-FLAMMABLE AS DETERMINED BY THE AEROSOL FLAME
PROJECTION TEST PER MSDS.
Chemical Properties
HCC:V2
Boiling Pt:B.P. Text:-11F,-24C
Vapor Pres:3103 @ 77F
Vapor Density:> 1
Spec Gravity: 0.8
Evaporation Rate & Reference:>1 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:MILKY WHITE, SLIGHT ODOR (AEROSOL CAN)
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI OR ALKALINE EARTH METALS - POWDERED ZN, BE ETC..
Stability Condition to Avoid:OPEN FLAMES, GLOWING METAL SURFACES,
STATIC DISCHARGES OR SPARKS
Hazardous Decomposition Products:HYDROFLUORIC AND HYDROCHLORIC ACIDS
Disposal
Waste Disposal Methods:DISPOSED OF IN ACCORDANCE WITH ALL APPLICABLE
LOCAL, STATE AND FEDERAL LAWS AND REGULATIONS. EMPTY OUT AEROSOL
CANS BEFORE DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.